Many laptops, tablets and phones only have USB-C, so casting starts with finding an adapter, and every visitor brings a different device. This design turns the TX into a USB-C dongle: a USB-C (DP Alt Mode) to HDMI chip on the carrier board feeds video to the module. Plug it into a device that supports video output over USB-C and cast; the RX outputs HDMI to a large display or portable monitor.
Thin laptops and tablets often have just one or two USB-C ports, and the HDMI cable on the table does not fit. People hunt for an adapter before the meeting, and if none turns up they copy files to someone else's laptop to present.
Meeting rooms and showrooms host whatever devices visitors bring, across many brands, operating systems and ports. Keeping an adapter and driver for each one is impractical, and failed connections regularly hold up meetings.
Wired presenting means a cable running from the table to the wall or display, unplugged and replugged every time the presenter changes. Constant pulling wears the connectors, and the cable clutters the table or display stand.
The TX is built as a USB-C dongle with a USB-C (DP Alt Mode) to HDMI chip on its carrier board. Plug it into the device and the picture goes wirelessly to the RX, with no HDMI cable or adapter to find.
TX and RX ship as a pre-paired set and link automatically at power-up, so visitors install no software and configure no network. The RX reads the display's real EDID and passes it back to the source, which cuts down on black screens, missing audio and downscaled output.
The RX outputs HDMI to a meeting-room display, projector or portable monitor. Embedded HDMI audio travels with the video, and the RX also has an analog audio output that switches over automatically when headphones are plugged in.
Touchscreens, keyboards, mice and other USB HID devices connected to the RX are passed back over the link and recognized by the source as local USB devices, with no drivers. People can work the source from the display side.
Tell us the resolution, range and interfaces you need. We reply with the module set, carrier-board documents and sample pricing.
Cabling hassle and adapter chaos in meeting rooms, especially with BYOD guests.
View solution →KVM ExtensionThe host must live in a rack or server room while the operator sits tens of metres away.
View solution →Film & BroadcastCameras move constantly while director, focus puller and client all need the same feed.
View solution →Portable DisplayPortable monitors still need an HDMI or Type-C cable to the source, which gets in the way when moving around or sharing the screen.
View solution →Wired & FiberBetween buildings, across a site or in heavy RF interference, wireless cannot reach and HDMI cable cannot run that far.
View solution →Pro DisplayWorkstations, graphics cards and pro monitors mostly use DisplayPort. Going wireless means stacking DP-to-HDMI adapters, which is messy and hard to keep compatible.
View solution →DockingLaptops have few ports, so monitors, keyboard and mouse, Ethernet and charging all need adapters, and casting in a meeting room means carrying yet another dongle.
View solution →In-Car ConnectivityThe head unit only supports wired CarPlay, so the phone has to be plugged in every trip, and rear passengers end up passing phones around to share content.
View solution →Medical & IndustrialMobile probes tangle cables; routing between operating room and lecture hall is restricted.
View solution →GamingConsole lives in the living room but you want to play in the bedroom or study.
View solution →Digital SignageCeiling-mounted screens are hard to wire and re-fitting means breaking walls again.
View solution →Long RangeAirborne video must reach the ground station in real time over long distances.
View solution →IndustrialHarsh machine-side conditions rule out terminals, and mobile units cannot drag video cables.
View solution →