Probe cables tangle and drag
Video cables on mobile probes and handheld devices follow the operator around, dragging across the floor and between equipment. They trip people up, tangle, and pull connectors loose, so the picture cuts in and out.
Video cables on mobile probes and surgical-field cameras move with the equipment, tangle easily, and are hard to route between rooms. This design embeds the TX and RX modules in the equipment and the display end to carry the picture wirelessly to the console or a teaching room. Where wireless does not suit the site, the 4K60 and 4K30 models can also run over a wired network or fiber.
Video cables on mobile probes and handheld devices follow the operator around, dragging across the floor and between equipment. They trip people up, tangle, and pull connectors loose, so the picture cuts in and out.
Every extra cable is one more thing to clean and manage. Each time equipment is moved or handed over, the cables have to be re-routed and wiped down, which takes up staff time.
Operating rooms, clean areas or workshops are usually separated from teaching or viewing rooms by walls and corridors. Temporary cables are impractical, and running new conduit means construction work and approvals, so getting the picture where it is needed is hard.
Endoscope and surgical-field images are viewed for fine texture and edges. If the resolution is downgraded in transit, viewers lose the detail they need to see.
The TX module (22×45 mm, 80-pin edge connector) plugs into a carrier board inside the equipment, and the RX is built into the display at the console or teaching room. No video cable trails from the probe side, and moving the equipment needs no rewiring.
The 4K60 models (ATE9460 / ATE9461) run 4K60 at every range tier. The RX reads the display's real EDID and returns it to the source, which avoids forced downscaling and black screens.
Wireless comes in three range tiers. The 4K60 and 4K30 modules have a built-in 100 Mbps Ethernet PHY, so adding a Ethernet magnetics and RJ45 on the carrier board gives a wired link of up to 500 m through switches. With fiber media converters the link extends to 10 km, 20 km or more.
Keyboards, mice and touchscreens at the RX are passed back over the link and recognized by the host as local USB devices with no drivers, so the host can be operated from the teaching room. Embedded HDMI audio travels with the video.
Surgical and exam images travel over an encrypted link with a key created at pairing. Unpaired devices cannot join or decode the picture, so teaching broadcasts are not picked up outside the department.
Tell us the resolution, range and interfaces you need. We reply with the module set, carrier-board documents and sample pricing.
Cabling hassle and adapter chaos in meeting rooms, especially with BYOD guests.
View solution →KVM ExtensionThe host must live in a rack or server room while the operator sits tens of metres away.
View solution →Film & BroadcastCameras move constantly while director, focus puller and client all need the same feed.
View solution →Portable DisplayPortable monitors still need an HDMI or Type-C cable to the source, which gets in the way when moving around or sharing the screen.
View solution →Wired & FiberBetween buildings, across a site or in heavy RF interference, wireless cannot reach and HDMI cable cannot run that far.
View solution →Pro DisplayWorkstations, graphics cards and pro monitors mostly use DisplayPort. Going wireless means stacking DP-to-HDMI adapters, which is messy and hard to keep compatible.
View solution →Mobile CastingLaptops, tablets and phones often have only USB-C, so casting starts with hunting for an adapter, and guest devices in meeting rooms and showrooms vary widely.
View solution →DockingLaptops have few ports, so monitors, keyboard and mouse, Ethernet and charging all need adapters, and casting in a meeting room means carrying yet another dongle.
View solution →In-Car ConnectivityThe head unit only supports wired CarPlay, so the phone has to be plugged in every trip, and rear passengers end up passing phones around to share content.
View solution →GamingConsole lives in the living room but you want to play in the bedroom or study.
View solution →Digital SignageCeiling-mounted screens are hard to wire and re-fitting means breaking walls again.
View solution →Long RangeAirborne video must reach the ground station in real time over long distances.
View solution →IndustrialHarsh machine-side conditions rule out terminals, and mobile units cannot drag video cables.
View solution →