KIT
Highlights
✓Evaluate without building a carrier board
✓Choose D40 / D80 / 8812CU range tier
✓Schematic and PCB reference included
Specifications
| Contents | ATE9460 + ATE9461 + 2 carrier boards |
| Pairing | Pre-paired |
| Power | Type-C 4.5 ~ 12 V |
| Antenna | External SMA |
| Purpose | Evaluation and range testing |
Power note: VBUS range is 3.7-5.1 V. Never exceed 5.1 V — overvoltage will damage the module. All VBUS pins must be connected in parallel.
OVERVIEW
Overview
Typical Applications
SIGNAL CHAIN
Signal Chain
Video goes from transmitter to receiver; EDID and keyboard/mouse data travel back to the host. Wireless and wired links use the same pair of modules.
4K30 vs 4K60
4K30 or 4K60
The two series differ in resolution and in how the transmitter provides loop-out.
SPECIFICATIONS
MECHANICAL
Dimensions
CARRIER BOARD
Carrier Board Design Notes
FAQ
FAQ
PAIRING
Pairing & Indication
| Action | LED | Result |
|---|---|---|
| Hold KEY 5s | Fast blink | Enters pairing mode and searches for the peer |
| Paired | Solid on | Link up and streaming; the RX overlays an OSD with pairing and key info |
| Hold KEY 25s+ | Slow blink | Factory reset: clears SSID, key and pairing — re-pairing required |
Get the Full Datasheet
Includes the 80-pin assignment, electrical parameters, mechanical drawings and carrier-board guidelines.
Contact UsRelated Models
TX
ATE9430T
ATE9430T Wireless Video Transmitter with HDMI Loop-out
HDMI in, encode, transmit at up to 4K30. Built-in HDMI loop-out at 4K30 feeds a local monitor without an external splitter.
View specs →RX
ATE9430R
ATE9430R Wireless Video Receiver Module
Receive, decode and output HDMI at up to 4K30, or up to 120Hz at 1080p.
View specs →TX
ATE9460
ATE9460 Wireless Video Transmitter
HDMI in, encode, transmit. 80-pin edge connector, 22x45mm, 4K60 with EDID pass-through.
View specs →